Alf
Each member has their own Blog on StreetRodding.com that can be accessed at blogs.StreetRodding.com/yourUserName. Read the online journals of other StreetRodding.com members, pick up tips and secrets from the pro's, ask questions of the rodding community or just tell us what's going on in your neck of the woods!
|
| Has anyone had experience using Cable X system for speedo conversion?
|
|
We have just finished installing a late model powertrain in a 1957 Chevy Nomad. The transmission is a late model 700r with an electronic speedo sensor. The problem is that the customer wants to keep the stock speedometer and the transmission has an electr |
| 11/13/2008 07:13 PM |
General Discussions |
Comments (4) |
| Newer transmission, old speedometer
|
|
We are installing a late model crate engine with a 700R transmission into a 1957 Chevy. No big deal, however when we got to the part of hooking up the stock speedometer we discovered that this model was set up for the electronic type. Can anyone tell me |
| 10/21/2008 02:22 PM |
General Discussions |
Comments (2) |
|
|
|
Newer transmission, old speedometer |
| 10/21/2008 09:52 AM |
General Discussions |
Comments (0) |
| Starting a build on a 1953 Dodge
|
|
what is available in a front suspension kit? |
| 02/29/2008 07:07 PM |
General Discussions |
Comments (5) |
| Aftermarket suspension advice requested,53 Chevy pickup
|
|
We are starting a new project for a customer, it is a 1953 Chevy pickup. The customer wants independent suspension in front, of that he is sure. As for who's kit we use ,he is leaving up to us. We have never done this exact type of vehicle before, but we |
| 10/11/2007 04:06 PM |
General Discussions |
Comments (15) |
| Power steering leaks
|
|
I am running out of ideas....help |
| 09/03/2007 10:00 AM |
Builder's Corner |
Comments (7) |
| Appreciation for a good product
|
|
Billet Specialies Tru-Trac system |
| 06/16/2007 06:58 PM |
General Discussions |
Comments (0) |
| Ramjet runs, body on the frame.....progress!!
|
|
We finally have the 502 Ramjet running as it should. It still has a rough idle, but GMPP assures us that it will smooth out as it gets some hours on it. It seems the ECU "learns" as you run it. It really sounds wicked right now. Of course, open headers te |
| 05/23/2007 10:24 AM |
General Discussions |
Comments (6) |
| Update on RamJet problems
|
|
We may have found the problem with the 502 RamJet that would not idle and ran rough. The system would start right up, but then slow down and in about 20 seconds stall. We started wih all the obvious things, timing,fuel pressure, wiring errors. The breakth |
| 05/10/2007 08:34 PM |
General Discussions |
Comments (2) |
| 502 RamJet
|
|
Anyone have experience with these? |
| 05/06/2007 09:48 AM |
General Discussions |
Comments (5) |
| Barry Grant Six Shooter
|
|
I am looking for input from someone who has used this system. |
| 03/08/2007 07:13 AM |
General Discussions |
Comments (11) |
