Each member has their own Blog on StreetRodding.com that can be accessed at blogs.StreetRodding.com/yourUserName. Read the online journals of other StreetRodding.com members, pick up tips and secrets from the pro's, ask questions of the rodding community or just tell us what's going on in your neck of the woods!
|
| cooling fans again
|
|
Need a little info/insight--Thinking of putting a pusher fan on the ragtop. Runs down the road just fine temperature wise. At idle it is starting to creep up over 200 especially with a/c on. I have 17 inch flex fan which pulls a goodly amount of air |
| 07/16/2008 10:01 AM |
General Discussions |
Comments (21) |
| over flow tank
|
|
Anyone have a 2inch by 10 inch overflow tank(and brackets) laying around they would like to get rid of. Would rather steer money you guys' way if I can. thanks |
| 07/15/2008 09:41 PM |
Looking to Buy! |
Comments (2) |
| another legend passes
|
|
Just read where customizer Dick Dean passed on. another great legend will apply his skills up in the great beyond RIP |
| 07/15/2008 09:23 AM |
General Discussions |
Comments (2) |
| disc brake drag
|
|
Replaced the front calipers on ragtop yesterday. Was puling --brake application at highway speeds. left wheel was hotter than the right. Have single pot under floor m/c with Midland power booster and in line residual valves etc. Was just wondering how |
| 07/09/2008 09:52 PM |
General Discussions |
Comments (5) |
| rear view mirror
|
|
any easy way to remove a glued on mirror from the windshield--without breaking glass. usually fall off when you least expect it. Thanks |
| 07/09/2008 09:49 PM |
General Discussions |
Comments (13) |
| Rear suspension dilemna
|
|
Just talked to the gurus at CE and they basically don't recommend using their kit for ragtops. Can't find anyone who has used this kit on a ragtop that has any advice either way. They really couldn't offer any suggestions as to what to do. so I am aski |
| 06/10/2008 09:48 PM |
General Discussions |
Comments (8) |
| CE rear suspension
|
|
Getting ready to order CE rear suspension kit for my 47 Chevy ragtop--probably tomorrow or next day--any pros or cons on use of rear sway bar. Don't know if I need it or not. Drove the ragtop 500 miles this past weekend..Mechanically---except for rough |
| 06/09/2008 02:36 PM |
General Discussions |
Comments (7) |
| ragtop driving ?
|
|
Getting ready for trip to Indy. Will have top down sometime over the weekend(weather permitting). Wife has strange concept of driving with the top down and the windows up.(doesn't want to mess hair up) told her no way--top down/windows down. How about |
| 06/06/2008 02:32 PM |
General Discussions |
Comments (24) |
| valve seals
|
|
I am replacing valve seals on sbc. Second one in last 6 months. can anyone tell me why someone only puts them on the intake valves only. Found 4 umbrella seals on just the intakes and orings on the exhaust. I know the intake would tend to suck the oil |
| 05/23/2008 11:30 PM |
General Discussions |
Comments (2) |
| CE rear suspension
|
|
Has anyone installed Chassis Engineering rear suspension in a 46-48 Chevy convertible? Was wondering what modifications have to be made to install the setup. I think it is all in the shock bar placement. does it make a difference if the shocks are moun |
| 05/22/2008 07:30 PM |
General Discussions |
Comments (8) |
| Senility???
|
|
Must be old age setting in. Thought I had front end all redone and tight when lo and behold I look up and see the lower control arm bushings are bad. So I go to replace them and the caliper mounting brackets are loose. Take the bolts out--they are OK-- |
| 05/19/2008 07:45 AM |
General Discussions |
Comments (3) |
| pcv vs. oil consumption
|
|
How much oil consumption--blue smoke should come out the tailpipe if the valve cover does not have a baffle where the pcv is placed.seems to me it would suck a little out of the cover through the intake and burn it out the tailpipe. Thanks. |
| 05/09/2008 09:49 PM |
General Discussions |
Comments (5) |
| rear springs
|
|
Looking for some stock rear springs for 47 Chevy. Any one has some laying around in the trash pile close to Southern Illinois. Need to add acouple to my ragtop. Thanks |
| 05/08/2008 10:13 AM |
Looking to Buy! |
Comments (2) |
| leaf springs
|
|
need a crash course on adding a leaf or 2 to the rear springs on my ragtop(47 Chevy) original springs. Where would be the best spot to put the spring. It has 7 leaves in it now and was thinking 1 maybe 2 would help in getting the rear end up a hair. An |
| 05/06/2008 08:56 AM |
General Discussions |
Comments (12) |
| Battery ground
|
|
While under the ragtop trying to work on rear suspension, I noticed only the positive battery cable came out of the trunk and headed up to the starter. PO has the ground battery cable bolted to the trunk floor. Now I don't build streetrods but I have n |
| 04/29/2008 09:46 AM |
General Discussions |
Comments (30) |
| rear end revisted
|
|
In talking to a few members here, I am going to reinforce the shock mounts and put new shocks on it. If I still have car after the cruise season, I will look into putting a CE system under it. Any difference between Gabriel and Monroe. Found a couple o |
| 04/18/2008 08:53 PM |
General Discussions |
Comments (5) |
| rear suspension dilemna
|
|
Just took our first trip in ragtop(47 Chevy) did pretty well. Did ride like the proverbial log wagon. was told it was CE rear suspension--it wasn't. Not sure what it is. Looks likea mish mash of stuff. original springs--missing a leaf or two--to get |
| 04/15/2008 10:11 AM |
General Discussions |
Comments (6) |
| leak proof?
|
|
Made a portable umbrella for the ragtop today. PO swore it hardly leaked at all. Well it does--I slowed it down to a waterfall but need some protection for outside overnight parking. Not a bad color comination.. Such fun. Headed to Bunny Run in Jacks |
| 04/07/2008 11:45 AM |
General Discussions |
Comments (6) |
| Interior material
|
|
I am needing a source for some material for my car. Seems to be around 1988 Ford, possibly, TRITON pattern in gray. Upholstery shop says it is no longer available. Need enough to cover 2 bucket seats. Any leads out there would help. thanks |
| 04/05/2008 12:31 PM |
General Discussions |
Comments (3) |
| On the ground
|
|
Car is finally on the ground. Off to alignment shop on Friday, upholstery shop to get buttons for the boot--all in the rain. guess I will find out how much it leaks. Hope this is all worth it. thanks for all your help---but it ain't done yet. |
| 04/01/2008 07:42 PM |
General Discussions |
Comments (2) |
