At StreetRodidng.com everyone has a voice and everyone has something useful to contribute to the community. The User Blogs have been created to give each member a central place to "blog". Blogging is basically the same thing as a Discussion Forum and very similar to an online diary. You can come to the site whenever you want and post your thoughts on rodding, post tips to users, post questions for experts and generally "blog". Other visitors to the site will be able to find you quickly and easily from your "home page" or from links on message postings, car ads, emails, etc. Any Blog that you start will be listed here for others to read.
|
| still here
|
|
Hello all, still here and I don`t have an excuse, just working alot, finish the room many months ago, so takeing a break. and the car ? (well)picking at it . Still working on fenders when I can, but enjoying the car anyway.Going to Billet Proof this week |
| 09/15/2008 11:22 PM |
General Discussions |
Comments (0) |
| Build car and ?
|
|
How come when you start building A car and your not done with it , your spouse thinks you got time to add A room on to your house? Can`t figure that out,but soon as I`m done with the room back on the car I go. I was thinking it would make A nice showroom |
| 10/19/2007 05:07 PM |
General Discussions |
Comments (14) |
| universal brake metering valve block
|
|
I guess I need to install one for the front disc brakes and rear drums,because my master c is under the floor, but to find these metering valve is a diffirent story. fun fun fun do the brakes again,well better safe than sorry. I thought I had the right s |
| 08/07/2007 09:40 PM |
General Discussions |
Comments (2) |
| Nothing much
|
|
Hello all, still here just hell`a buisy,Im trying to remember the timing setting on the 350 with a mild rv cam 10degrees BTDC ? Johnny G. |
| 07/17/2007 04:36 AM |
General Discussions |
Comments (1) |
| Coilover spring adjustments?
|
|
Coilover spring is set half way,the problem is if I hit A bump on the freeway,the car slams real hard and sounds like the rear end is hitting the frame.But the question is do I tighten the spring or loseing the spring. The set up is A model A |
| 01/07/2007 10:58 AM |
Q&A |
Comments (16) |
| Brite orange paint
|
|
I read somebody`s page and they are painting A new duce roadster orange.I think the paint was pti,stp,pta,lmnop? darn I don`t know?I sure would like to know the maker of that paint, and color code or the color name please,I like that color. Than |
| 01/05/2007 07:13 PM |
Q&A |
Comments (10) |
| polyester primer
|
|
Do you need to use etch primer before you use poly primer?Because I did not. and do I need to redo my work? Thank you John G. &nbs |
| 09/27/2006 11:01 PM |
Q&A |
Comments (5) |
| Fuel gauge
|
|
Are fuel pressure gauges for electric fuel pumps only, or does it matter? |
| 08/27/2006 03:38 PM |
Q&A |
Comments (4) |
| To shine
|
|
Hay Shine, my neighbors wanted their spare tires back.What do you think of these truck tires Ha! Ha! John |
| 05/29/2006 07:40 AM |
Q&A |
Comments (1) |
| so cun fused
|
|
What size is a 74 mavrick 8inch rear end. 8inch 7.5inch 8.8inch I am so cun fused because I am trying to find a pumkin with 3.55 or 3.73 gears? |
| 03/07/2006 08:06 PM |
Q&A |
Comments (3) |
| 350 motor
|
|
I just screwed up my motor today,by getting on it and then something went south, making a banging sound,A clank like a rod came lose or some thing, The sound is entermitten only when I give it gas. the car will run but rough,no smoke or anthing,oils |
| 03/06/2006 09:01 PM |
Q&A |
Comments (58) |
| 8 inch rear axle
|
|
Hello,guys and gals. Do you guys know what is an idea gear ratio for 350motor 350 tranny,three speed automatic, for an 8inch ford maverick rear end. Right now i`m running a 3:00 witch seems a little slow on take off and low rpms? Next question |
| 02/25/2006 11:00 PM |
Q&A |
Comments (12) |
| 8 inch rear axle
|
|
Hello,guys and gals. Do you guys know what is an idea gear ratio for 350motor 350 tranny,three speed automatic, for an 8inch ford maverick rear end. Right now i`m running a 3:00 witch seems a little slow on take off and low rpms? Next question |
| 02/23/2006 12:54 AM |
Q&A |
Comments (2) |
| Motor Question?
|
|
Would it be ok to check the torque on my crank journals and piston caps since I got the pan off? or will I cause problems? thank you John G. |
| 01/11/2006 08:20 PM |
Q&A |
Comments (6) |
| jomoty 30 coupe
|
|
this is my car still in the works, I`m driving it now, to work the bugs out while I work on the fenders, I`m all body worked out,but it will be nice when done. thanks Johnny G. |
| 09/14/2005 07:46 PM |
Q&A |
Comments (7) |
| Model A front brake problem
|
|
Today I had A majior front brake problem,the car has been sitting for about two weeks,then I decided to take the car to work to day,30 miles away,when I started driving the brakes started to pull to the left,will got to work ok, then on my way home |
| 07/20/2005 04:49 PM |
Q&A |
Comments (9) |
| Vega steering box rebuild kit?
|
|
Does anyone know wear to buy a rebuild kit for a vega steering box? Thank You John G. |
| 07/19/2005 05:19 PM |
Q&A |
Comments (7) |
| Vega box steering/Hugger header
|
|
30 coupe, TCI chassis, Vega box, hugger headers are to close for the flamming river swivels. Do I need to get differnt motor mounts ? differnt Headers? can some one help? my headers are so close to the steering box ,I can`t get the steering swivel on,I`m |
| 07/18/2005 10:38 PM |
Q&A |
Comments (8) |
| Vega box Adustment
|
|
Is there Away to adjust the play in A vega steering box? I`m not comfortable with the play at 70 mph Thanks Guys Johnny G. |
| 06/16/2005 02:28 PM |
Q&A |
Comments (11) |
| Model A front tires hit four bars
|
|
3o coupe Tci chassis,46" dropped front axle, vega box ,stock spear temperary Front Tires hit four bars when turning right to left. is there an adjustment on the vega box or do I need pizza cutters on the front. Thank You, Johnny G. |
| 05/11/2005 10:11 PM |
Q&A |
Comments (3) |
