At StreetRodidng.com everyone has a voice and everyone has something useful to contribute to the community. The User Blogs have been created to give each member a central place to "blog". Blogging is basically the same thing as a Discussion Forum and very similar to an online diary. You can come to the site whenever you want and post your thoughts on rodding, post tips to users, post questions for experts and generally "blog". Other visitors to the site will be able to find you quickly and easily from your "home page" or from links on message postings, car ads, emails, etc. Any Blog that you start will be listed here for others to read.
|
| hot rod strollers
|
|
where can i find abody of some of the popular streetrod bodies that are use for the hot rod strollers i have a grand son on the way and would like to have one ready for his arrival |
| 06/10/2008 12:41 PM |
General Discussions |
Comments (28) |
| SBC spark plug wires
|
|
Who makes the correct lenght spark plug wires you see on some of the street rods ?or do you buy the kit to make them your self , i bought some premium ones at the local parts house and they look ugly they are too long or just long enough, i'm stuck with t |
| 04/28/2008 07:52 PM |
General Discussions |
Comments (5) |
| New truck
|
|
Well i finally gave up my 2.4 s10 i got my 10 years out or it but it was starting to have costly repairs @325000 miles, i originally wanted a HHR my wife did not like them ,she says they are cute?so i looked at aSILVERRADO standard cab short wheel base WT |
| 04/22/2008 11:35 AM |
General Discussions |
Comments (0) |
| mustnag II manual rack lost data
|
|
i submitted a question on MII manual rack i got some info but i lost it can some who knows the year and gear ratios available please help thanks in advanced |
| 04/19/2008 09:05 PM |
General Discussions |
Comments (3) |
| Springway Spetaculer
|
|
Anybody go to the Spring rod run in Daytona?a freind of mine says you can tell economy may be affected the turn out this year |
| 04/04/2008 07:35 PM |
General Discussions |
Comments (2) |
| Flipping the drop axle
|
|
Any reason why swapping the springs from top of axle to bottom of axle to get a lower stance ?i know i have to change the spring perch but not a big deal plenty of clearnce . |
| 03/30/2008 09:23 PM |
General Discussions |
Comments (4) |
| AL HOFFMAN DIES AT AGE 60
|
|
AL Hoffman died of a heart attack on 3/20/ 08in UMATILLA ,Fl |
| 03/23/2008 10:59 PM |
General Discussions |
Comments (5) |
| Neutral Safety Switch
|
|
Where is the neutral safety on a 400R switch i found out the hard way the truck was in reverse when i thought it was in park when i shut it off good thing there was nothing around ,better yet someone to get hurt .good thing i had my foot on the brake ,a h |
| 03/17/2008 04:25 PM |
General Discussions |
Comments (4) |
| Streetrodding screensaver
|
|
i see some of our members have some cool picks of there ride some i have been down loadig and adding them to my hotrod folder which is my cscreensaver it would be cool to have an official one with streetrodding 'logo' on one corner some picks are to small |
| 03/16/2008 03:12 PM |
General Discussions |
Comments (12) |
| floor jack
|
|
My 25 year old CRAFTSMAN floor jack gave out last winter so i went to to local parts store for a replacement of my 2.5 ton jack well a had it for 9 months i can see it loosing height and some times i see a drop of oil on the floor go figure its made in Ch |
| 03/15/2008 08:51 PM |
General Discussions |
Comments (14) |
| Manual Rack Mustang II
|
|
Are all Mustang II manual Racks the same or did they change during there life span are there numbers stamped that you can use to order a replacement? |
| 03/12/2008 01:34 PM |
General Discussions |
Comments (6) |
| To Welt or not To Welt
|
|
Early forty and older cars/trucks use welt in between fenders and the body,running boards,aprons and so on i know they eliminate rubbing and protect the paint to prevent rust but through time if not installed right they work themselves out around curves,i |
| 03/01/2008 04:27 PM |
General Discussions |
Comments (5) |
| rusty hardware
|
|
Whats is your favorite penetrant to use on removing rusted stubborn bolts ive used everyone available to the genearl puplic, so far i like "KROIL" i was given a sample when i worked in the aerospace industry years ago . |
| 02/26/2008 10:06 AM |
General Discussions |
Comments (15) |
| questioable old paint
|
|
i, am looking over my paint on my truck it is going to be stripped i noticed a blister, i opened it up no rust the metal is clean it looks like it was sand blasted not prepared prior to applying the primer it was done by a amature any ideas |
| 02/19/2008 12:28 PM |
General Discussions |
Comments (10) |
| fresh Air
|
|
Where is the best place to pick up fresh air for your HVACon a pre 40 truckif your cowl vent is shaved |
| 02/10/2008 02:35 PM |
General Discussions |
Comments (5) |
| heat/cold and noise
|
|
what is being used in todays street rods to insulate the inside from heat /cold and outside noise like wind and engine |
| 02/08/2008 02:08 PM |
General Discussions |
Comments (8) |
| Cams
|
|
Grwing up i use to hear "Gearheads "talking about cams then I learn more about cams ,it was more technical it was all about lift and duration. so back in the day ,what was a 3/4 cam? i have one in my 327 at least that is what the guy who sold me the tr |
| 01/28/2008 08:34 AM |
General Discussions |
Comments (10) |
| Rear End?
|
|
I have a 1938 chevy P/U with a rear end from a Camaro it has 4:11 gears the motor is a 327 with a 400 turb equipt with a shift kit ,iwould like to chsnge it out wit a S-10 rear end that has a towing package i heard this set up is stout with the right gear |
| 01/25/2008 12:57 PM |
General Discussions |
Comments (17) |
| Rear End?
|
|
Rear end swap |
| 01/20/2008 04:47 PM |
Tech Tips |
Comments (6) |
