At StreetRodidng.com everyone has a voice and everyone has something useful to contribute to the community. The User Blogs have been created to give each member a central place to "blog". Blogging is basically the same thing as a Discussion Forum and very similar to an online diary. You can come to the site whenever you want and post your thoughts on rodding, post tips to users, post questions for experts and generally "blog". Other visitors to the site will be able to find you quickly and easily from your "home page" or from links on message postings, car ads, emails, etc. Any Blog that you start will be listed here for others to read.
|
| OFFSET BRAKE PEDAL PUSHROD
|
|
In the process of locating the power brake components in my frame, I have an offset between the center of the brake booster and center of the brake pedal, by 1 7/8". I know it would probabnly be best to move the brake pedal into alignment with the booste |
| 07/05/2008 04:56 PM |
General Discussions |
Comments (7) |
| MIG Welding
|
|
I'm a novice welder and have always "pulled" my wire away from the weld bead as I weld. Then, I happen to catch a rod building TV program the other day, where they said "pushing " the tip away from the weld bead , was a better and cleaner weld. Any opi |
| 06/05/2008 07:16 PM |
General Discussions |
Comments (13) |
| Shipping to California
|
|
Can someone direct me to a resonable and reliable shipping agent, that will haul a crated engine and transmission from Viginia to Northern California ? Name and phone number is all I'll need. Thanks, Sach |
| 03/30/2008 10:00 PM |
General Discussions |
Comments (3) |
| CRUISE - IN REMINDER
|
|
For those of you that wanted a reminder. The Surry County Community College Cruise - In , will be held on Novenber 3rd, 2007 at the College in Dobson, NC. Starts at 2 P.M. and ends at dark. Free admission and music by the " Generation Gap", so bring your |
| 10/24/2007 08:28 PM |
General Discussions |
Comments (1) |
| Autum Cruise - in
|
|
Hello to fellow rodders in New England, Are there any Cruise - ins or car shows happening in the New England States during October ? The wife and I are planing a fall trip to see the leaves and a Cruise - in would fill the bill. Thanks, Sach |
| 09/23/2007 08:43 PM |
General Discussions |
Comments (4) |
| CRUISE - IN
|
|
There will be a CRUISE - IN at the Surry Community College, in Dobson N.C. on Saturday, November 3, 2007, from 2 PM until dark, rain or shine. It's free admission and open to the public. Drive over with your antique, street rod, classic car, pro stree |
| 09/14/2007 06:35 PM |
General Discussions |
Comments (10) |
| searching for steering column
|
|
I'm searching for a junkyard steering column, with tilt and without column shift. I need one 34 to 35 inches long. Any ideas what vehicle offers such criteria ? Thanks, Sach |
| 08/29/2007 07:38 AM |
General Discussions |
Comments (6) |
| Power brakes ?
|
|
Ok guys & gals, I need some input on the pros and cons of running a street rod without power brakes. It's been many years since I've driven a car WITHOUT power brakes and I was curious to hear from you all , about how well your rod reacts without t |
| 08/06/2007 11:23 AM |
General Discussions |
Comments (13) |
| TRU-RAM exhaust manifold
|
|
Anyone know offhand, if the TRU-RAM exhaust manifold will work on the sbc with D port heads and angled plugs ? Thanks, Sach |
| 07/04/2007 03:04 PM |
Q&A |
Comments (7) |
| lost relay
|
|
Can anyone tell me where the cooling fan relay is on a '93 pont grand am with the quad 4 engine ? Thankx in advance. Sach |
| 04/28/2007 07:53 AM |
General Discussions |
Comments (2) |
| cartoon avatar
|
|
Just a test showing avatar |
| 04/05/2007 12:39 PM |
General Discussions |
Comments (1) |
| Rear trans mount
|
|
They're back and better than ever! |
| 03/13/2007 07:05 PM |
Tech Tips |
Comments (4) |
| Rear trans mount
|
|
They're back and better than ever! |
| 03/13/2007 07:05 PM |
Q&A |
Comments (4) |
| Rear trans mount
|
|
They're back and better than ever! |
| 03/13/2007 07:05 PM |
Builder's Corner |
Comments (4) |
| New Site
|
|
Well, after fumbeling my way through the new Site, I'm begining to find my way through it. I see that my previous blog made it through, with photos even ! If I can do it , so can the other members. Have faith. |
| 02/08/2007 04:15 PM |
Tech Tips |
Comments (2) |
| New Site
|
|
Well, after fumbeling my way through the new Site, I'm begining to find my way through it. I see that my previous blog made it through, with photos even ! If I can do it , so can the other members. Have faith. |
| 02/08/2007 04:15 PM |
Q&A |
Comments (2) |
| New Site
|
|
Well, after fumbeling my way through the new Site, I'm begining to find my way through it. I see that my previous blog made it through, with photos even ! If I can do it , so can the other members. Have faith. |
| 02/08/2007 04:15 PM |
Builder's Corner |
Comments (2) |
| rear trans mount
|
|
I recently purchased a '91 Corvette engine and 700R4 trans. It is complete except for the rear trans mount. Can someone tell me how the rear mount attaches to the trans tail shaft housing ? It appears to me that the mount would be above the trans and t |
| 01/14/2007 06:37 PM |
Q&A |
Comments (5) |
| Basic Training Part 1
|
|
Well, I.ve been enrolled in the paint and refinishing class at my local community college now since August and I want to tell you guys ( and gals ) that I'm more versed on the body shop industry now than ever before. You earn your money the hard way an |
| 12/07/2006 04:20 PM |
Paint Booth |
Comments (6) |
| basic training
|
|
Wow ! You guys are a wealth of information. I've never painted before but would like to attempt to do my project to save money. Can any one suggest a basic training book of some sort ? I hate to tie up the forum with a lenghty discussion about the do's |
| 08/12/2006 09:58 AM |
Paint Booth |
Comments (12) |
