At StreetRodidng.com everyone has a voice and everyone has something useful to contribute to the community. The User Blogs have been created to give each member a central place to "blog". Blogging is basically the same thing as a Discussion Forum and very similar to an online diary. You can come to the site whenever you want and post your thoughts on rodding, post tips to users, post questions for experts and generally "blog". Other visitors to the site will be able to find you quickly and easily from your "home page" or from links on message postings, car ads, emails, etc. Any Blog that you start will be listed here for others to read.
|
| Info on a past post
|
|
Does anybody remember a post awhile back that delt with stainless ribs on running boards. Someone had mentioned a supplier for the stainless half round. I wrote it down and as usual can't remember where I put it. I think it was through one of the boat har |
| 07/20/2008 04:12 PM |
General Discussions |
Comments (5) |
| Better Halfs Truck is Finally DONE!!!!!!
|
|
Well seeing Brian made a comment at Mid-America Nats that he had heard about Carol's truck being "almost done" for quite awhile I decided to finally finish it. It made it's first major trip this weekend with no problems. Got a few rattles to chase down bu |
| 06/16/2008 04:58 PM |
General Discussions |
Comments (9) |
| World of Rods Magazine
|
|
Anybody here of or look at this magazine ? Ran into them at Louisville last year. They are based out of CA. They are offering us some free editorial coverage in exchange for free/dicounted parts. Not sure if it's legit or just someone out for free parts. |
| 04/23/2008 08:11 AM |
General Discussions |
Comments (2) |
| 40 Merc grill
|
|
A while ago I posted looking for an after market grill for a customer's 40 Merc. Judging by the response (none) I assumed no one was making them. Sooooo we decided to dive in and build one for our customer. We just finished it up today. It's all stainless |
| 03/29/2008 07:49 PM |
Builder's Corner |
Comments (7) |
| NSRA Southwest Nats
|
|
We will be set up there this year, inside the building. Stop in and say hi. Anybody from that area know of any circle track racing going on while we are in the area (April 2-6,2008) |
| 03/25/2008 09:34 PM |
General Discussions |
Comments (0) |
| Memories of 2007
|
|
Well seeing it’s closing in on the end of another year it would be neat to hear about your most enjoyable/memorable streetrod experience(s) that happened over the last year. Although I’ve attended a lot of shows and events this last year as a commercial e |
| 12/16/2007 03:04 PM |
General Discussions |
Comments (8) |
| 1940 Merc grill
|
|
Anybody know of a good (emphasis on good) reproduction grill for a 1940 Merc. A customer brought in one off of his car that is a reproduction of unknown origin and the quality is poor (very). Before I spend the time to build him a custom one I'd like to s |
| 10/16/2007 08:34 PM |
General Discussions |
Comments (0) |
| Amazing what can be done in a day
|
|
It's amazing how much you can get done in a day when the wife is away and a couple of buddies show up to help. Installed the box lids, both doors, and hood and have them all pretty much tweaked. Got a small problem with one door, something under the paint |
| 09/22/2007 03:35 PM |
General Discussions |
Comments (3) |
| Back on track
|
|
Well after a busy summer things have settled down to the point where I can spend some time on the wifes truck. Got the air unit all in, all that's left on the wiring is the remotes and some final connections under the dash. Set it down on it's wheels ton |
| 08/29/2007 08:12 PM |
General Discussions |
Comments (3) |
| Neat project for someone
|
|
HotRod Bus |
| 08/21/2007 09:21 PM |
StreetRods For Sale |
Comments (10) |
| Finally found some time
|
|
Found some time to work on the bride's truck (the one that was supposed to be done last year) |
| 02/25/2007 12:07 PM |
General Discussions |
Comments (10) |
| Need Info
|
|
Planning on setting up this year at Mid-America Nats in Springfield, MO. Any info on show, hotels, good places to eat, etc. would be greatly appreciated.Thanks, Jim |
| 02/02/2007 08:12 AM |
Q&A |
Comments (7) |
| anybody remember these
|
|
Found this in an elderly neighbors garage. I remember they sold these dummy continental kits in J.C.Whitney catalogs. Anybody remember the brand name or other info ?? |
| 11/16/2006 05:38 PM |
Q&A |
Comments (5) |
| Model A roller
|
|
Looking for a roller "A" chassies for a customer. Would prefer drop axle front/coilover rear but will consider Mustang II setup. Will be going under a roadster pickup.Thanks, Jim |
| 09/30/2006 08:27 AM |
Looking to Buy! |
Comments (1) |
| Stop in and say hi
|
|
Just an invitation to everyone here to stop in at our booth and say hi. We will be in Jefferson, WI for the spring swap meet on April 28-30. Then we will be in Knoxville, TN for the NSRA Southern Nats on May 5-7. Hope to meet some |
| 04/23/2006 08:49 AM |
Q&A |
Comments (0) |
| Hinge help
|
|
In the rebuild of my wifes truck I decided to trick out the box with two flush mounted covers. They fit into a lip bent all around the opening. The problem I have is getting a hinge to work on them. It needs to lift the hinge side of the cover up as it ti |
| 02/17/2006 10:34 PM |
Q&A |
Comments (15) |
| Wheelbase for a 37 Plymouth Coupe
|
|
Anybody know what the wheelbase is supposed to be on a 37 Plymouth coupe? Did they have several differant ones like they did in earlier years?Thanks, Jim |
| 01/23/2006 10:14 AM |
Q&A |
Comments (7) |
| Knoxville Hotel
|
|
Planning on going to the Nats South in Knoxville as a commercial exhibitor. Anybody have some suggestions for a hotel other than the host one.Thanks, Jim |
| 01/13/2006 01:22 PM |
Q&A |
Comments (5) |
| Olds brackets feedback
|
|
Judging by the amount of feedback I got on the original post about Olds air conditioning brackets no one else knows anyone selling/building them either. Here's the question, if I designed and built them do you think there is much of a market for |
| 11/29/2005 03:37 PM |
Q&A |
Comments (3) |
| Olds air conditioning brackets
|
|
Anybody know of some company out there that builds brackets for a Olds 350. Putting air on wifes truck and hate the idea of using the stock brackets.Thanks, Jim |
| 11/27/2005 02:01 PM |
Q&A |
Comments (0) |
