Who can make a custom made radiator hose. I have a pattern of old hose. Hose is on 32 hotrod. Needs to have a custom fit due to cross brace in hood.
Thanks,
Phil
Posted by ronhotrod - 07/03/2008 08:03 PM
either use CoolFlex or have local exhaust shop bend one from your pattern, paint to match and use ruber hose nipples to connect. Cover connections with alum ends to dress (Billet specialties) or use heat shrink clamps
CoolFlex is the best. Have had it on mine, both upper and lower for 6 years, no problems. If you don't like the polished stainless look they also make it in colors, black, red, blue and purple.
Some imitations don;t use copper in,side the hose, but coolflex does. Not saying that the ones with out copper are bad, but as usually you get what you pay for.
I just happened to have a koolflex hose i'm selling. I bought it for another car i had and never used it. It's this one http://www.yogisinc.com/Detail.cfm/-/Product_CD=FX2011/Category=3285/product.htm