Isn't it nice when something goes right?!
Posted: June 21 2008 05:45 AM
|
I think I finally got something right. I won't know for sure until I get the rear-end fabricated to the frame (some time in the future), but I had to order wheels so I could get my frame rolling for my eventual move. It was almost impossible to find any wheels that would work for me because of the Jag (wide) rear end. The rear end required a bunch of offset to be right to work with the Jag hubs (like 40 to 60mm). And the front required basically no offest to work with the MII/Chevy brake combo. Basically, the ONLY rim I could find that might work was a 15" American Racing "Outlaw II" wheel. It came in both a 50mm and a -6mm offset. They were also inexpensive ($65 a copy). I got them in, and the fronts fit perfectly, but the rears need a 1/2" spacer because of the large lip on the Jaguar hub. (That scared me actually because I was afraid that extra inch would cause fender clearance issues). But, after measuring again, that lip on the hub was included in the spec. I had found. After mocking everything up-- BOTH the front and back came in at 65 1/2"! I should still have room for tire (I figure I have about 70" of wheel well. That should make at least ONE thing easier..... Mark |