Nov 6, 2018 6:57 PM - 197 Views Create A New Thread
Hey everyone, I have a Autoloc AUCTKL 550 5 channel remote in my car it works fine but it only came with one key fob. I bought two new ones and it says in the instructions turn key on and press valet button to set learn mode, mine doesn't have one . I can't get through to AUTOLOC. I just have two doors to open nothing else. Thank You
Please see summary
SHARE THIS THREAD
StreetRodding.com Is Proud To Have The Following Advertisers Supporting This Site.
Nov 11, 2018 at 6:30 PM
Blades' experiences mirror mine, with one exception. The 75 lbs operators, I could only find them with Hoffman. I had a 37 Chevy that I really liked. I installed a pull cable, and the new owner needed it day one. LOL.
Personally, I find that shaved door handles are not worth the trouble. They are nothing but a maintenance nightmare. Especially since I drive my cars, and not look at and wax them. I had the best of everything, 10ga wire, expensive bellcranks, coated cables, the whole nine yards. Absolutely not worth the problems.
Nov 10, 2018 at 7:52 PM
- Thanks for the information.
Nov 8, 2018 at 7:50 AM
Autoloc in Oregon = 503 693 6608. tech 503 693 1918
Always have a manual cable release.
Jim, School of Hot Rod Hard Knocks
410 535 1933
Nov 7, 2018 at 10:29 PM
- Great information thanks for posting Willie Moore
Nov 7, 2018 at 8:22 AM
- The valet button (momentary switch) is a separate switch usually mounted under dash or in the glove box (some place hidden). If you can't find yours, download the instructions for your controller and follow the valet wires from the controller to where yours is located. Or you could install a new momentary switch.
Nov 7, 2018 at 7:11 AM
- 1st problem AUTOULOC, stay away from anything associated with the Hoffman group
Sign in to comment.